Figure 2. Model, sample and method. (Left) A periodic unit of a metasurface was simulated with periodic
boundaries that were applied for x- and y-axis directions to effectively model an infinite array of the periodic
structure. Each dimension was given from cx=1.7, cy=7.6, dx=0.5, dy=1.3, g=1.0, l=2.4, p=18.0, rx=2.0,
ry=1.0, tp=0.017 and ts=1.524 (all in mm). The capacitor-based metasurface had a capacitor (1nF) in parallel
with a resistor (10 kΩ), while the inductor-based metasurface had an inductor (100μH) in series with a resistor
(5.5Ω).
Results (
Thai) 1:
[Copy]Copied!
รูปที่ 2 รุ่น ตัวอย่าง และวิธีการ (ซ้าย) หน่วยเป็นครั้งคราวที่ metasurface ถูกจำลอง ด้วยเป็นครั้งคราวขอบเขตที่ใช้แกน x และ y ทางไปได้อย่างมีประสิทธิภาพ รุ่นอนันต์หลากหลายประจำงวดโครงสร้าง แต่ละมิติที่ได้รับจาก cx = 1.7, cy = 7.6, dx = 0.5, dy = 1.3, g = 1.0, l = 2.4, p = 18.0, rx = 2.0ลี่ = 1.0, tp = 0.017 และ ts = 1.524 (ทั้งหมดมม.) การใช้ตัวเก็บประจุ metasurface มี (1nF) ตัวเก็บประจุแบบขนานด้วยตัวต้านทาน (10 kΩ), ในขณะเหนี่ยวนำตาม metasurface มีการเหนี่ยวนำ (100μH) ในชุดมีตัวต้านทาน(5.5Ω)
Being translated, please wait..

Results (
Thai) 3:
[Copy]Copied!
รูปที่ 2 รูปแบบ , ตัวอย่างและวิธีการ ( ซ้าย ) หน่วยตารางธาตุของ metasurface ) ด้วยเป็นระยะ ๆขอบเขตที่ใช้ x และแกน y เส้นทางได้อย่างมีประสิทธิภาพรูปแบบอาร์เรย์ที่ไม่มีที่สิ้นสุดของการเป็นระยะ ๆโครงสร้าง ในแต่ละมิติได้จาก CX = 1.7 , ไซ = 7.6 , DX = 0.5 , ดี้ = 1.3 กรัม = 1 , L = 2.4 , p = 18.0 RX = 2.0 ,ry = 1.0 , TP = 0.017 และ TS = 1.524 ( มิลลิเมตร ) metasurface ใช้ตัวเก็บประจุมีตัวเก็บประจุ ( 1NF ) ขนานกับตัวต้านทาน ( 10 K Ω ) ในขณะที่มีการ metasurface ตามทาง ( 100 μ H ) อนุกรมกับตัวต้านทาน( 5.5 Ω )
Being translated, please wait..
