SPE (Oasis HLB cartridge, 500 mg, 6 mL, Waters, Milford, MA) and HPLC-MS/MS (Agilent 1200 Series, Agilent QQQ 6410, USA) were used to analyze soluble concentrations of TC. An Agilent XDB-C18 analytical column (2.1 × 150 mm, 3.5 μm ) was used, and the column temperature was 23 °C. Solvents B and C were acetonitrile and 0.2% formic acid in nanopure water, and the flow rate was 0.4 mL/min. The percentage of solvent B and C were 15% and 85%, respectively. The sample injection volume was 3 μL . TC were ionized in the positive ionization mode and analyzed with the following parameters: capillary voltage 4000 V; nebulizer pressure 35 psi; drying gas, N2, 8 L/min; gas temperature 350 °C.
Results (
Thai) 2:
[Copy]Copied!
SPE (Oasis HLB Cartridge, 500 mg, 6 มิลลิลิตร Waters, ฟอร์ด, แมสซาชูเซต) และ HPLC-MS / MS (Agilent 1200 ซีรี่ส์, Agilent QQQ 6410, สหรัฐอเมริกา) ถูกนำมาใช้ในการวิเคราะห์ความเข้มข้นของ TC ที่ละลายน้ำได้ Agilent XDB-C18 คอลัมน์วิเคราะห์ (2.1 × 150 มิลลิเมตร 3.5 ไมครอน) ถูกนำมาใช้และอุณหภูมิคอลัมน์ 23 ° C ตัวทำละลาย B และ C เป็น acetonitrile และ 0.2% กรดในน้ำ nanopure และอัตราการไหล 0.4 มิลลิลิตร / นาที ร้อยละของตัวทำละลาย B และ C เป็น 15% และ 85% ตามลำดับ ปริมาณการฉีดกลุ่มตัวอย่างเป็น 3 ไมโครลิตร TC ถูกแตกตัวเป็นไอออนในโหมดไอออไนซ์ในเชิงบวกและการวิเคราะห์ด้วยพารามิเตอร์ต่อไปนี้: เส้นเลือดฝอยแรงดันไฟฟ้า 4000 V; ความดัน nebulizer 35 ปอนด์ต่อตารางนิ้ว; การอบแห้งก๊าซ N2, 8 ลิตร / นาที; อุณหภูมิก๊าซ 350 ° C
Being translated, please wait..
