Hold down the function button on the front of the TeraStation for 3 seconds until it beeps.
For RAID 1, 5, or 6:
The TeraStation will start rebuilding the RAID array automatically. After a few minutes, the
I18 message will be displayed until the array is rebuilt.
For RAID 51 or RAID 61:
The TeraStation will start rebuilding the RAID array automatically. After a few minutes, the
I18 message will be displayed until the array is rebuilt.
If 3 or more drives were replaced in a RAID 51 array, or if 4 or more drives were replaced in a
RAID 61 array, wait 10 minutes after I18 appears and navigate to Drives - RAID in Settings.
Select the RAID array and check if "Recover RAID Array" button is displayed. If so, select the
drives that were not included in the RAID array and click Recover RAID Array.
For JBOD:
The drive will be formatted as an individual drive. Create a shared folder on the drive before
use.