To make recycled toilet paper, larg

To make recycled toilet paper, large bales of recycled paper are put into a pulping machine at the toilet paper factory. The paper is mixed with lukewarm water to form a pulp before entering an ink-removing process.To remove ink, the paper pulp is injected with air, making the ink rise to the top in a foam. This foam is then removed with a skimmer and the pulp is now ink-free.Next, the water is squeezed out by passing the pulp through rollers. This dries it out and allows it to absorb bleaching chemicals to make the grey pulp clean and white. Before bleaching, revolving knives cut the pulp.After bleaching, the pulp is spread on a flat screen that runs through a dryer. It dries into a delicate paper in less than a second, and is then rolled onto a large spool to be ready for embossing. Patterns are embossed on the paper to thicken it, which improves absorbency.Endless cardboard tubes are also produced in the factory; the endless tube is cut into lengths and then transported (via conveyor belt) to the toilet paper section to be attached to the paper.The long tubes have wide sheets of paper wound around them to the right length. When the roll is done, rolling stops, and the paper is cut with a blade. This long roll is then moved on, and winding begins on the next roll.The rolls are automatically sealed with glue to stop them from unwinding, and then the long roll is sliced into individual rolls of the correct width.From here it is packaged and sent off to distributors.

Results (Chinese) 1:

为了使再生卫生纸，回收纸的大捆的卫生纸厂家放入打浆机。纸是用微温的水混合进入的油墨去除工序之前，以形成浆。

以除去油墨中，纸浆被注入空气，使油墨上升到顶部的泡沫。这种泡沫然后用撇去删除，现在纸浆是无墨。

接着，将水通过使纸浆通过辊挤出。这干了出来，并允许它吸收漂白化学品，使灰色纸浆干净洁白。漂白前，旋转刀切割的纸浆。

漂白后的纸浆是一个平面上的传播，通过烘干机运行。其干燥成精巧纸在不到一秒钟，然后卷绕到卷轴大以准备压花。图案压印在纸加厚它，从而提高吸收性。

无端纸板管也产生在工厂; 环形管被切成长度和然后输送（通过输送带）到卫生纸部附连到纸上。

长管具有合适的长度周围纸卷绕的宽片材。当卷完成后，滚动停止，是裁切用刀片。然后，该长辊上移动，并在下次卷的卷绕开始。

该辊用胶水自动密封以从退绕停止它们，然后将长辊被切成正确的宽度的各个轧辊。

从这里被打包发送关闭以分销商。

Results (Chinese) 2:

为了制作再生卫生纸，将大包再生纸放入卫生纸厂的制浆机中。在进入除墨工艺之前，将纸张与温水混合，形成纸浆。

为了去除墨水，纸浆被注入空气，使墨水上升到泡沫的顶部。然后，用滑水器去除这种泡沫，现在纸浆是无墨的。

接下来，水通过滚筒将纸浆挤出。这干燥它，并允许它吸收漂白化学品，使灰浆清洁和白色。漂白前，旋转刀切割纸浆。

漂白后，纸浆在通过干燥机的平面屏幕上传播。它在不到一秒钟内干燥成一张精致的纸，然后卷到一个大的滑阀上，准备压花。图案在纸张上浮雕以加厚，从而提高了吸收率。

工厂也生产无休止的纸板管;无尽的管子被切成长度，然后（通过传送带）运送到卫生纸部分，以连接到纸张上。

长管有宽的纸片缠绕到正确的长度。完成卷筒后，滚动停止，用刀片切割纸张。然后，这个长辊继续移动，绕组在下一卷上开始。

卷筒用胶水自动密封，以阻止它们展开，然后将长辊切成正确宽度的单个卷。

从这里它被包装并发送给分销商。

Results (Chinese) 3:

为了制造可回收的卫生纸，卫生纸厂的制浆机里放了一大包可回收的纸。将纸张与温水混合形成纸浆，然后进入油墨去除过程。
为了去除墨水，纸浆被注入空气，使墨水在泡沫中上升到顶部。然后用撇沫器去除泡沫，纸浆现在不含墨水。
接下来，水通过滚筒通过纸浆被挤出。这使它干燥，并允许它吸收漂白化学品，使灰色纸浆干净和白色。漂白前，旋转刀切浆。
漂白后，纸浆被分散在一个通过烘干机的平板筛上。它在不到一秒钟的时间内干燥成一张精致的纸，然后卷成一个大线轴，准备压花。图案压印在纸上使其变厚，从而提高了吸水性。
工厂还生产无头纸板管；无头纸板管被切割成一定长度，然后（通过传送带）运输到卫生纸部分与纸相连。
长长的管子上缠着几张很宽的纸。卷好后，停止卷纸，然后用刀片切纸。这一长卷接着移动，下一卷开始卷绕。
卷被自动地用胶水密封以阻止它们退绕，然后长卷被切成正确宽度的单个卷。
从这里开始包装并发送给经销商。