Zinc is frequently present at trace level in cadmium and their compoun translation - Zinc is frequently present at trace level in cadmium and their compoun Thai how to say

Zinc is frequently present at trace

Zinc is frequently present at trace level in cadmium and their compounds . However, the spectrophotometric determination of this element in these matrices is troublesome because many of the chromogenic reagents proposed also react with cadmium.
Numerous methods have been published for such determination. However, they are not simple and usually require extensive and laborious steps for the separation of zinc from cadmium, using procedures which involve: liquid – liquid extraction [1 – 6] of zinc or cadmium, ion ex- change [7,8], and precipitation [9].
This paper proposes a method for the separation and determination of zinc in cadmium matrices based on solid-phase extraction (SPE) of zinc in the form of thiocyanate complexes by the polyurethane foam (PU foam).
The PU foam has been used as a solid sorbent on a wide variety of inorganic and organic compounds from different media. It was first proposed by Bowen [10] in 1970. Braun [11–13] and Palagyi [14] have described reviews about the use of PU foam in procedures of separation and preconcentration.
The use of PU foam for zinc extraction has been proposed by several authors [15–18]. The extraction mechanism of the zinc by the PU foam in the form of thiocyanate complexes has been studied by Moody et al. [15]. Maloney et al. [16] have proposed a procedure for simulta- neous extraction of zinc, cobalt(II), iron(III) and cadmium(II) from thiocyanate medium by PU foam. Nickel is not extracted. Braun and Abbas [17] have proved that zinc, mercury and indium are extracted quantitatively by PU foam in the form of thiocyanates complexes. Hamza et al. [18] have used PU foam treated with dithizone for the extraction of zinc and bis- muth.
Zinc(II) reacts instantaneously with 4-(2- pyridylazo)-resorcinol (PAR) [19,20] in the range of pH from 9.0 to 10.0, forming a com- plex with maximum absorption at 496 nm and molar absorptivity of 8.30×104 l mol− 1 cm− 1. Cadmium(II) also reacts with PAR, forming a
complex with absorption maximum at 510 nm
and molar absorptivity of 8.12 × 104 l cm−1.
mol − 1
0/5000
From: -
To: -
Results (Thai) 1: [Copy]
Copied!
Zinc is frequently present at trace level in cadmium and their compounds . However, the spectrophotometric determination of this element in these matrices is troublesome because many of the chromogenic reagents proposed also react with cadmium.Numerous methods have been published for such determination. However, they are not simple and usually require extensive and laborious steps for the separation of zinc from cadmium, using procedures which involve: liquid – liquid extraction [1 – 6] of zinc or cadmium, ion ex- change [7,8], and precipitation [9].This paper proposes a method for the separation and determination of zinc in cadmium matrices based on solid-phase extraction (SPE) of zinc in the form of thiocyanate complexes by the polyurethane foam (PU foam).The PU foam has been used as a solid sorbent on a wide variety of inorganic and organic compounds from different media. It was first proposed by Bowen [10] in 1970. Braun [11–13] and Palagyi [14] have described reviews about the use of PU foam in procedures of separation and preconcentration.The use of PU foam for zinc extraction has been proposed by several authors [15–18]. The extraction mechanism of the zinc by the PU foam in the form of thiocyanate complexes has been studied by Moody et al. [15]. Maloney et al. [16] have proposed a procedure for simulta- neous extraction of zinc, cobalt(II), iron(III) and cadmium(II) from thiocyanate medium by PU foam. Nickel is not extracted. Braun and Abbas [17] have proved that zinc, mercury and indium are extracted quantitatively by PU foam in the form of thiocyanates complexes. Hamza et al. [18] have used PU foam treated with dithizone for the extraction of zinc and bis- muth.Zinc(II) reacts instantaneously with 4-(2- pyridylazo)-resorcinol (PAR) [19,20] in the range of pH from 9.0 to 10.0, forming a com- plex with maximum absorption at 496 nm and molar absorptivity of 8.30×104 l mol− 1 cm− 1. Cadmium(II) also reacts with PAR, forming acomplex with absorption maximum at 510 nmand molar absorptivity of 8.12 × 104 l cm−1.mol − 1
Being translated, please wait..
Results (Thai) 2:[Copy]
Copied!
สังกะสีเป็นประจำในปัจจุบันที่ระดับร่องรอยในแคดเมียมและสารประกอบของพวกเขา อย่างไรก็ตามการกำหนดสเปกขององค์ประกอบในการฝึกอบรมเหล่านี้จะลำบากเพราะหลายน้ำยา chromogenic เสนอยังทำปฏิกิริยากับแคดเมียม.
วิธีการจำนวนมากได้รับการตีพิมพ์สำหรับการกำหนดดังกล่าว แต่พวกเขาจะไม่ง่ายและมักจะต้องทำตามขั้นตอนที่กว้างขวางและลำบากสำหรับการแยกจากสังกะสีแคดเมียมโดยใช้ขั้นตอนที่เกี่ยวข้องกับ: ของเหลว - สกัดของเหลว [1-6] สังกะสีหรือแคดเมียมไอออนอดีตเปลี่ยน [7,8] และฝน [9].
กระดาษนี้นำเสนอวิธีการแยกและความมุ่งมั่นของสังกะสีในการฝึกอบรมแคดเมียมอยู่บนพื้นฐานของการสกัดของแข็งเฟส (SPE) ของสังกะสีในรูปแบบของคอมเพล็กซ์ thiocyanate โดยโฟมยูรีเทน (PU โฟม).
โฟม PU ถูกนำมาใช้เป็นตัวดูดซับที่มั่นคงในความหลากหลายของสารอนินทรีและอินทรีย์จากสื่อที่แตกต่างกัน มันได้รับการเสนอครั้งแรกโดยเวน [10] ในปี 1970 Braun [11-13] และ Palagyi [14] ได้อธิบายความคิดเห็นเกี่ยวกับการใช้โฟม PU ในขั้นตอนของการแยกและเข้มข้น.
การใช้โฟม PU สำหรับการสกัดสังกะสีได้รับการเสนอ โดยผู้เขียนหลาย [15-18] กลไกการสกัดสังกะสีโดย PU โฟมในรูปแบบของคอมเพล็กซ์ thiocyanate ได้รับการศึกษาโดยมูดี้ส์และอัล [15] มาโลนี et al, [16] ได้เสนอขั้นตอนการสกัด neous พร้อม ๆ กันของสังกะสีโคบอลต์ (II) เหล็ก (III) และแคดเมียม (II) จากกลาง thiocyanate โดย PU โฟม นิกเกิลจะไม่สกัด Braun และอับบาส [17] ได้พิสูจน์ว่าสังกะสีปรอทและอินเดียมที่สกัดจากปริมาณ PU โฟมในรูปแบบของคอมเพล็กซ์ thiocyanates Hamza et al, [18] ได้ใช้โฟม PU รับการรักษาด้วย dithizone การสกัดสังกะสีและ Muth bis- ได้.
สังกะสี (II) ตอบสนองทันทีด้วย 4 (2 pyridylazo) -resorcinol (PAR) [19,20] ในช่วง pH จาก 9.0-10.0 กลายเป็นซับซ้อนกับการดูดซึมสูงสุดที่ 496 นาโนเมตรและฟันกรามดูดกลืนแสงของ 8.30 × 104 ลิตร mol- 1 ซม 1. แคดเมียม (II) ยังทำปฏิกิริยากับ PAR
กลายเป็นที่ซับซ้อนที่มีการดูดซึมสูงสุดที่510
นาโนเมตรและฟันกราม. ดูดกลืนแสงของ 8.12 × 104 ลิตรซม-1
mol - 1
Being translated, please wait..
Results (Thai) 3:[Copy]
Copied!
I can support badminton competitionI can support badminton competitionI can support badminton competitionI can support badminton competitionI can support badminton competitionI can support badminton competitionI can support badminton competition
Being translated, please wait..
 
Other languages
The translation tool support: Afrikaans, Albanian, Amharic, Arabic, Armenian, Azerbaijani, Basque, Belarusian, Bengali, Bosnian, Bulgarian, Catalan, Cebuano, Chichewa, Chinese, Chinese Traditional, Corsican, Croatian, Czech, Danish, Detect language, Dutch, English, Esperanto, Estonian, Filipino, Finnish, French, Frisian, Galician, Georgian, German, Greek, Gujarati, Haitian Creole, Hausa, Hawaiian, Hebrew, Hindi, Hmong, Hungarian, Icelandic, Igbo, Indonesian, Irish, Italian, Japanese, Javanese, Kannada, Kazakh, Khmer, Kinyarwanda, Klingon, Korean, Kurdish (Kurmanji), Kyrgyz, Lao, Latin, Latvian, Lithuanian, Luxembourgish, Macedonian, Malagasy, Malay, Malayalam, Maltese, Maori, Marathi, Mongolian, Myanmar (Burmese), Nepali, Norwegian, Odia (Oriya), Pashto, Persian, Polish, Portuguese, Punjabi, Romanian, Russian, Samoan, Scots Gaelic, Serbian, Sesotho, Shona, Sindhi, Sinhala, Slovak, Slovenian, Somali, Spanish, Sundanese, Swahili, Swedish, Tajik, Tamil, Tatar, Telugu, Thai, Turkish, Turkmen, Ukrainian, Urdu, Uyghur, Uzbek, Vietnamese, Welsh, Xhosa, Yiddish, Yoruba, Zulu, Language translation.

Copyright ©2024 I Love Translation. All reserved.

E-mail: