Normally, as the temperature increases, the amount of oxygen dissolved in solution decreases as the boiling point is reached resulting in reduced corrosion rates. However, on the surface covered by insulation, a poultice effect is created which holds in the moisture which essentially makes it s closed system. In fact the measured corrosion rates associated with corrosion under insulation follow trends to higher corrosion rates commonly associated with only pressurized systems. Furthermore, in cases where precipitation becomes trapped on the metal surface by insulation, corrosive atmospheric constituents such as chlorides and sulfuric acid can concentration to also accelerate corrosion. In some cases, chlorides are present in the insulation which greatly promotes corrosion of the underlying surface which it becomes laden with moisture.