When the current ISR1 starts flowin

When the current ISR1 starts flowing through the body diode, the voltage across
the power MOSFET drain-source becomes negative; as it reaches the negative
threshold V
TH.ON
, the power MOSFET is switched on.
The threshold at which the power MOSFET turns on can be set by the following
formula:

Results (Chinese Traditional) 1:

當前 ISR1 啟動流經的體二極體兩端電壓的時功率 MOSFET 漏源變為負值;當它達到負門限 V釷對功率 MOSFET 開關。可以通過以下設置的閾值功率 MOSFET 導通計算公式︰

Results (Chinese Traditional) 2:

當電流ISR1流經體二極管開始，兩端的電壓
的功率MOSFET的漏-源變成負; 在達到負
閾值V
TH.ON
，功率MOSFET被接通。
功率MOSFET導通時，可以通過以下來設置的閾值
的公式：

Results (Chinese Traditional) 3:

當電流isr1開始流經體二極體兩端的電壓功率MOSFET的漏源成為負數；在達到負閾值Vth.on，功率MOSFET開關。在該閾值的功率MOSFET的開啟可以設定如下公式：