SECTION 7HANDLING AND STORAGE7.1Precaution for safe handlingTechnical Measures:Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower.Precautions:Avoid prolonged or repeated contact with skin. Avoid inhaling vapor or mist. When handling product in drum, safety shoes should be worn and proper handling equipments should be used.7.2Condition for safe storage including any incompatibilitiesSuitable storage conditions:Keep container tightly closed in a cool, well-ventilation place. Storage temperature does not exceed 50°C. Keep away from source of ignition and oxidizing agent.Safe packing materials:Steel drum, steel pail, HDPESECTION 8EXPOSURE CONTROLS / PERSONAL PROTECTION8.1Control parametersACGIH (TLV):5mg/m3OSHA (PEL):5mg/m38.2Appropriate engineering controls:The use of local exhaust ventilation is recommended to control process emission near the source. Provide mechanical ventilation of confined spaces to maintain air concentration below occupational exposure standard.8.3Individual protection measures such as Personal Protective Equipment (PPE)Respiratory protection:Use as appropriate to situation.Hand protection:Rubber gloves, recommend nitrile rubberEye protection:If diffusion is possible, wear safety glasses.Skin and body protection:Wear oil-resistant long-sleeve cloth when treat long term or get wet.Hygienic:Wash hands thoroughly after handling.SAFETY DATA SHEET SDS: HYDOL WAY 220XMORESCO (THAILAND) CO., LTD. Revised date: May 16, 2012Page 4 of 6PrecautionsRegularly inspect protective equipment according to the inspection table of protective equipment. Do not eat, drink or smoke when using this productSECTION 9PHYSICAL AND CHEMICAL PROPERTIESPhysical StateForm:LiquidColor:Yellow transparentOdor:Mild petroleumFreezing/Melting Point:Not availableBoiling Point Range:Not availableFlashpoint (TCC ASTM D56):250 °C minimumEvaporation Rate (n-Bu Acetate = 1):1Density (15 °C):0.89-0.90 g/cm3Solubility in water: