ข้อความ
คำอธิบาย:
If the "AWD disabled" is posted in DIM and DTC P188918 is set in DEM then follow advice under "service"
รายงานเกี่ยวกับรถยนต์:
Yes, please submit a Vehicle Report if the service solution described in this TJ has no effect. Use concern area "Vehicle Report" and sub concern area "Support not needed", use function group 4651.
บริการ:
1.Remove oil pump from AOC and inspect the strainer. (See att.)
2.Clean strainer with lint-free cloth, do not use any cleaning liquids (this can contaminate the oil)
3.Clean pump sump in AOC, do not use any cleaning liquids (this can contaminate the oil)
4.Assemble cleaned pump to AOC (Active On demand Coupling)
5.Fill up with new oil to correct oil level in AOC according to VIDA.
6.Perform a calibration using VIDA
If there is a screeching noise (see attachment) and the calibration finishes within one minute, the AOC is OK, and sludge on the strainer and/or air in the oil system is root cause. Release the car.
If there is not a screeching noise, and the calibration process takes more than one minute due to autostarting two times, then do a test drive while trying to provoke front wheels slip (obey all traffic laws and be aware of your surrounding). If the DTC returns, then replace the complete AOC.
If the car is inside structure week 201220-201419, use VIDA
to order and download the following SW after AOC replacement::
31411060 for car 134, 155, & 156
31411059 for car 124, 135 & 136
31411061 for car 526