The basic mechanical design of the

The basic mechanical design of the Werth tomography measuring machines relies on proven standard components which are also used in other Werth coordinate measuring machines.
This ensures a high level of reliability, reproducibility and accuracy.
Additional sensors can also be integrated.
When computed tomography is combined with conventional sensors, such as touch probe systems, image processing, laser sensors, or the tactile-optical Werth fiber probe, it opens up another range of possibilities.
These sensors can be mounted on a second independent axis, which prevents collisions.
The sensors can be positioned outside of the working area when the tomography is running.
The highest level of flexibility is provided when the multisensory axis is equipped with a pivot or a rotary-pivot joint with a sensor exchange inter-face.

If components are difficult to measure due to their material composition, or if even more precise measurements are required, then partial areas or special features can be measured with a tactile or optical probe.

Another important application is to save time by creating the datum of the work-piece using the high precision Werth fiber probe (patent) and then scan a 3d point cloud with the CT sensor related to this datum as opposed to scanning the entire work-piece.

Multi-sensors can also be used for reducing systematic measurement errors in tomography due to artifacts.
Using Werth Auto-correction (patent pending) , these systematic deviations can be captured on master parts, then laser automatically corrected during production measurements.
For example, measurement of micro bores in steel parts can be done at a precision of better than one micron, comparable to that of the Werth fiber probe.
The measurements can be traced to the length standard of the German National Metrology institute (ptb), while taking into account the actual work-piece properties.
The best guarantee, for traceability of the measurement results, is given if the measuring instruments are calibrated by the Werth calibration laboratory which is certified by the German National Accreditation Body (DAkkS) for tomography machines.
The calibration is performed comparable to the VDI Guideline 2617 Part 13.

Results (Javanese) 1:

Desain mechanical dhasar saka Werth tomografi ukuran mesin gumantung buktiaken komponen standar kang uga digunakake ing liyane Werth koordinasi mesin ukuran.
Iki njamin tingkat dhuwur saka linuwih, reproducibility lan akurasi.
sensor Tambahan uga bisa ditingkat.
Nalika komputer tomografi digabungake karo sensor conventional, kayata sistem tutul satelit gambar Prosès, sensor laser, utawa satelit serat Werth tactile-optical, iku mbukak nganti sawetara liyane kemungkinan.
sensor Iki bisa dipasang ing sumbu sawijining kapindho, kang ngalangi tabrakan.
Ing sensor bisa dipanggonke njaban wilayah digunakake nalika tomografi mlaku.
Ing tingkat paling dhuwur saka keluwesan wis kasedhiya nalika sumbu multisensory dilengkapi karo poros utawa peserta Rotary-poros karo ijol-ijolan sensor Inter-pasuryan. Yen komponen angél kanggo ngukur amarga komposisi materi sing, utawa yen malah pangukuran sing luwih tepat sing dibutuhake, banjur wilayah sebagean utawa fitur khusus bisa diukur karo tactile utawa satelit optik. aplikasi penting irit wektu nggawe datum saka karya-Piece nggunakake dhuwur satelit tliti Werth serat (patent) lan banjur cepet titik maya 3d karo sensor CT related kanggo datum iki minangka walikane mindhai kabeh karya-Piece. Multi-sensor uga bisa digunakake kanggo ngurangi kasalahan Takeran rapi ing tomografi amarga artefak. Nggunakake Werth Auto-koreksi (Pending patent), iki standar rapi bisa dijupuk ing bagean master, banjur laser otomatis didandani sak pangukuran produksi. Contone, Takeran saka bores mikro ing bagean baja bisa rampung ing tliti luwih saka siji micron, iso dibandhingke kanggo sing saka satelit serat Werth. Ing pangukuran bisa ditelusuri standar dawa ing Jerman Nasional Metrology institute (PTB), nalika njupuk menyang akun properties karya-Piece nyata. Ing njamin paling apik, kanggo traceability saka asil pangukuran, diwenehi yen instruments ukur sing nyelarasake dening laboratorium kalibrasi Werth kang certified dening Body ing Jerman Nasional Akreditasi (DAkkS) kanggo mesin tomografi. kalibrasi wis dileksanakake iso dibandhingke kanggo Pedoman vdi 2617 Part 13.