2.1.2.2. Reduced graphene oxide. Graphite oxide (GO) is synthesized
by Hummers method which involves treatment with potassium
permanganate (KMnO4) and concentrated sulfuric acid (H2SO4)
for simultaneous oxidation and exfoliation of graphite (Hummers
and Offeman, 1958). The acid treatment introduces polar oxygen
functional groups like epoxies, carbonyls, hydroxyls, etc. which
makes GO hydrophilic. Using mild sonication, the GO sheets can
be dispersed with ease in many solvents, particularly well in water
(Paredes et al., 2008). Thereafter, the colloidal solution of graphene
oxide can be reduced to graphene using different treatments like
chemical reduction by directly adding reducing agents like hydrazine
(Stankovich et al., 2007) or by thermal reduction using elevated
temperatures (200–900 C) (McAllister et al., 2007).
Electrochemical reduction by immobilizing the GO onto an electrode
surface and successively performing reducing scans by
sweeping potential from 0 to 1.5 V is perhaps the simplest and
86 P. Ramnani et al. / Chemosphere 143 (2016) 85–98
most convenient method to obtain reduced graphene oxide (rGO)
(Zhou et al., 2009a) ready for use as transducer. Typical dimensions
of rGO flakes thus obtained vary from sub-micron to few microns.
The reduced graphene oxide still contains some defect sites in the
form of sp3 centers and oxygen functional groups due to incomplete
reduction. These functional groups can be used for direct
covalent binding of biological receptor and are known to enhance
the electrocatalytic properties of graphene.
Results (
Thai) 2:
[Copy]Copied!
2.1.2.2 ลดออกไซด์ graphene กราไฟท์ออกไซด์ (GO) ถูกสังเคราะห์
โดยวิธี Hummers ที่เกี่ยวข้องกับการรักษาด้วยโพแทสเซียม
เปอร์แมง (KMnO4) และกรดซัลฟูริกเข้มข้น (H2SO4)
สำหรับการเกิดออกซิเดชันพร้อมกันและขัดของกราไฟท์ (Hummers
และ Offeman, 1958) การรักษากรดแนะนำออกซิเจนขั้วโลก
กลุ่มทำงานเช่นอีพ๊อกซี่, สำเนา, hydroxyls ฯลฯ ซึ่ง
ทำให้ GO hydrophilic ใช้ sonication อ่อนแผ่น GO สามารถ
แพร่ระบาดได้อย่างง่ายดายในตัวทำละลายหลายโดยเฉพาะอย่างยิ่งในน้ำ
(Paredes et al., 2008) หลังจากนั้นเป็นต้นมาการแก้ปัญหาของคอลลอยด์ graphene
ออกไซด์สามารถลด graphene ใช้การรักษาที่แตกต่างกันเช่น
การลดสารเคมีโดยตรงโดยการเพิ่มตัวรีดิวซ์เช่นไฮดราซีน
(Stankovich et al., 2007) หรือโดยการลดความร้อนโดยใช้การยกระดับ
อุณหภูมิ (200-900 C) (McAllister et al., 2007).
ลดไฟฟ้าโดยตรึงไปสู่ขั้ว
พื้นผิวและการดำเนินการอย่างต่อเนื่องโดยลดการสแกน
ที่มีศักยภาพกวาดจาก 0 ถึง? 1.5 โวลต์อาจจะง่ายและ
86 พี Ramnani et al, / Chemosphere 143 (2016) 85-98
วิธีที่สะดวกที่สุดที่จะได้รับลดลงออกไซด์ graphene (RGO)
(Zhou et al., 2009a) พร้อมสำหรับการใช้เป็นตัวแปลงสัญญาณ ขนาดทั่วไป
ของสะเก็ด RGO จึงได้แตกต่างจากไมครอนไปไม่กี่ไมครอน.
ลดลงออกไซด์ graphene ยังคงมีข้อบกพร่องบางเว็บไซต์ใน
รูปแบบของศูนย์ SP3 และออกซิเจนกลุ่มทำงานไม่สมบูรณ์เนื่องจากการ
ลดลง การทำงานเป็นกลุ่มเหล่านี้สามารถนำมาใช้โดยตรง
โควาเลนต์ผูกพันรับทางชีวภาพและเป็นที่รู้จักกันเพื่อเพิ่ม
คุณสมบัติ electrocatalytic ของแกรฟีน
Being translated, please wait..
