closed voids and ratio of valleys t

closed voids and ratio of valleys to plateau produced
on the rolled sheet to be controlled, all parameters
that previous investigations have determined as
affecting both the formability and paintability of the
rolled sheet.
Figure 4: PDTTM Crater Matrix
In addition

Results (Chinese) 1:

封闭的空隙和山谷，高原比生产对冷轧板来控制，所有参数以前的调查已确定为可成形性和涂装的影响冷轧薄板。图 4: PDTTM 火山口矩阵另外

Results (Chinese) 2:

封闭的空隙和山谷生产的高原比例
的冷轧薄板上进行控制，所有的参数
，以前的研究已经确定为
既影响成形性和可涂性的
热轧板。
图4：PDTTM火山口矩阵
除

Results (Chinese) 3:

封闭的空隙和山谷的比例，产生的在冷轧板上进行控制，所有参数先前的调查已确定为影响两者的成形性和涂装性冷轧薄板。图4：pdttm坑矩阵此外